This is an Ametek Vacuum Motor for your Windsor Model #53021, 120 volt. It is suggested you replace the motor gasket Part MTR511. Uses motor brushes part MTR505.
This is an Ametek Vacuum Motor for your Windsor #8.600-540.0 and #8.625-851.0, 24 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed...
This is an Ametek Vacuum Motor for your Windsor #86202040, 120 volt. It is suggested that you replace the motor gasket, see our part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a...
Windsor Sensor Lock Catch 5098HG
Windsor Upright Vacuum Cleaner Models VS14 VS18 Foot Pedal Release. OEM Windsor Part2528ORWi-2528OR
Windsor Model VSP14 VSP18 Upright Vacuum Cleaner Circuit Board 120V 3-P UL1936ERWi-1936ER
PLEASE NOTE, THIS MOTOR DOES NOT HAVE REPLACEABLE CARBON BRUSHES. THUS WHEN THE BRUSHES WEAR OUT, MOTOR MUST BE SCRAPPED AND REPLACED. This motor is an inexpensive version of the branded motor listed above and carries all of the same specs, mounting...
This is the Windsor Genuine VSP14 and VSP18 3-P UL Listed Circuit Board, 120 volt. Matches genuine Windsor part numbers: 8.613-995.0 & 86139950.
This is a New Windsor Model #862584300 Ametek Vacuum Motor, 120 volt. This motor has a 1 1/2 inch tube on the base of the motor. We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part #MTR1500. Our...
This is a factory replacement motor for the following Windsor carpet extractors: Windsor Admiral 8 Windsor Cadet 7 Windsor Clipper 12 Carpet Extractor Windsor 8.602-688.0 This motor has sealed bearings in it so dust and dirt will not get into...
This is the 115 Volt, 55 PSI, Windsor Pump # 8.620-111.0 PLEASE COMPARE THE PART NUMBER SHOWN ON THE PUMP YOU ARE REPLACING TO INSURE PROPER OPERATION
This is the Windsor Genuine VSP18 PCB Circuit Board. Matches genuine Windsor part numbers: 8.614-371.0 & 86143710.
This is an Ametek Vacuum Motor for your Windsor Model #53614, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all...
This is a factory replacement motor for your Windsor Dominator 2 Extractor. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for...
This is the Windsor Genuine 4.8 inch 2-stage Vacuum Motor, 120v. Matches genuine Windsor part numbers: 8.602-675.0 & 86026750. Fits the following models: Presto Mini-Extractor 2 (PRS2) Presto Mini-Extractor Presto Deluxe Mini-Extractor
This is the Windsor Genuine Oil Resistant Rubber Lip Set. Matches genuine Windsor part numbers: 6.273-207.0 & 62732070. Fits the following models: Chariot iScrub 24 Chariot CSX24 Chariot CSX24X Chariot CSXE24 B 40 C Ep B 40 B 60 W Bp Classic B 60 W Bp...
This is an Ametek Vacuum Motor for your Windsor #8.602-676.0, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all...
This is an Ametek Vacuum Motor for your Windsor Model #53142 and #53704, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a...
This is a factory replacement motor for your Windsor #53789 and #86026880, 120 volt. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTORDON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor by using our...
